| Last Modified: 11-29-2007 | 1.6 G | |
| Service Category: Vehicle Exterior | Section: Lighting (ext) | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000003GQ9000X |
| Title: LIGHTING (EXT): REAR LIGHT ASSEMBLY: ON-VEHICLE INSPECTION (2008 Sequoia) | ||
ON-VEHICLE INSPECTION
1. INSPECT REAR LIGHT ASSEMBLY LH
|
(a) Disconnect the connector from the rear light. |
(b) Measure the voltage and resistance according to the value(s) in the table below.
Standard:
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
|
V8-1 - V8-3 |
Light control switch OFF |
Below 1 Ω |
|
Light control switch in TAIL |
11 to 14 V |
|
|
V8-4 - V8-3 |
Shift lever not in R |
Below 1 Ω |
|
Shift lever in R |
11 to 14 V |
2. INSPECT REAR LIGHT ASSEMBLY RH
|
(a) Disconnect the connector from the rear light. |
(b) Measure the voltage and resistance according to the value(s) in the table below.
Standard:
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
|
V7-1 - V7-3 |
Light control switch OFF |
Below 1 Ω |
|
Light control switch in TAIL |
11 to 14 V |
|
|
V7-2 - V7-3 |
Shift lever not in R |
Below 1 Ω |
|
Shift lever in R |
11 to 14 V |
|
|